REBAR carbon

Walkable.
Highest performance.
Like steel only better.
Non-metallic reinforcement for structural design made from carbon fibers

solidian REBAR carbon is a non-corrosive, high-strength, non-metallic reinforcement material used in concrete structures. Made from high-strength carbon fibers our rebars offer excellent tensile strength, low weight and resistance to chemical and environmental degradation. They are ideal for use in harsh environments, such as critical infrastructure projects, including bridges, tunnels or marine structures.

solidian REBAR carbon could help engineers to extend the lifespan of concrete structures significantly while reducing maintenance costs and promote sustainability through enhanced durability and performance.

 

Product Features

Advantages

solidian REBARs will not rust and with their higher strength than steel, they are bringing life to filigree, elegant structures lasting for generations.

Our reinforcing bars can be used in any structural or architectural application where required material should be corrosion resistant or lightweight. Steel rebar corrosion is a matter of time, whatever thickness or sizes of concrete protection you are using. Because of that steel reinforced concrete structures need to be repaired or teared down after a certain time. With our carbon rebar this problem is solved and it has a number of additional special features that enable you to build a more sustainable concrete infrastructure for our and our children’s future.

  • Corrosion-resistant: thinner concrete cover, longer service life, lower concrete repair costs
  • Low weight, low abrasive
  • High tensile strength: lower overall construction costs
  • Sustainable and resource-saving: fewer construction materials are required and the service life is increased
  • Chemically, chloride- and alkali resistant
  • Better price/performance ratio than other competing non-metallic rebars

technical information about solidian REBAR carbon

Our high-strength reinforcing bars can be produced in different diameters up to 12 mm. Our noncorrosive reinforcing bar can be made in a diameter you require – 12 mm rebar being the thickest, then 10 mm rebar, 8 mm rebar, 6 mm rebar and 4 mm rebar being the thinnest rebar we produce. The standard length is 6 meters. Our standard portfolio are rebars made out of carbon fiber.

  • Available in carbon fibers
  • Diameter up to 12 mm
  • Standard length of 6 m
  • Customized productions possible on request – please contact us!

reinforcements for the future generations

Lightweight and easy to install
Up to 7x stronger than steel
Economically and ecologicaly sustainable
Versatile use in a wide range of aplications
More economical due to reduced consumption od materials
Minimum concrete cover due to corrodible-resistant reinforcement
ARTICLES
Name Diameter (mm) Weight (g/m) Material Length (m) Photo TDS
REBAR D4-CCE 4 23 Carbon & epoxy 6,00 Open gallery
REBAR D6-CCE

Non-steel reinforcing bars are predestined for the use in all areas where strong reinforcements are demanded and aggressive environmental impacts like e.g. chlorides are to be faced.

  • Bridge construction
  • Sewage applications
  • Concrete slabs like industrial floors, parking decks or driveways
  • Maritime applications
  • Façades and balconies
  • Tunnel and mining constructions
49 Carbon & epoxy 6,00 Open gallery
REBAR D8-CCE

Non-steel reinforcing bars are predestined for the use in all areas where strong reinforcements are demanded and aggressive environmental impacts like e.g. chlorides are to be faced.

  • Bridge construction
  • Sewage applications
  • Concrete slabs like industrial floors, parking decks or driveways
  • Maritime applications
  • Façades and balconies
  • Tunnel and mining constructions
90 Carbon & epoxy 6,00 Open gallery
REBAR D10-CCE

Non-steel reinforcing bars are predestined for the use in all areas where strong reinforcements are demanded and aggressive environmental impacts like e.g. chlorides are to be faced.

  • Bridge construction
  • Sewage applications
  • Concrete slabs like industrial floors, parking decks or driveways
  • Maritime applications
  • Façades and balconies
  • Tunnel and mining constructions
134 Carbon & epoxy 6,00 Open gallery
REBAR D12-CCE

Non-steel reinforcing bars are predestined for the use in all areas where strong reinforcements are demanded and aggressive environmental impacts like e.g. chlorides are to be faced.

  • Bridge construction
  • Sewage applications
  • Concrete slabs like industrial floors, parking decks or driveways
  • Maritime applications
  • Façades and balconies
  • Tunnel and mining constructions
190 Carbon & epoxy 6,00 Open gallery

Reference project

Product Applications

Non-steel reinforcing bars are predestined for the use in all areas where strong reinforcements are demanded and aggressive environmental impacts like e.g. chlorides are to be faced.

  • Bridge construction
  • Sewage applications
  • Concrete slabs like industrial floors, parking decks or driveways
  • Maritime applications
  • Façades and balconies
  • Tunnel and mining constructions

1/3

We’re here for you!
Send your inquiry, and we’ll get back to you soon!

Invalid Input
Invalid Input
Invalid Input
Invalid Input. Please enter only numbers like this: 00385911234567
Invalid Input
Invalid Input
Invalid Input
Invalid Input

Contact status

Invalid Input
Invalid Input

Product type

Invalid Input

Technology

Invalid Input
Invalid Input

Raw materials

Invalid Input
Invalid Input

Construction applications

Invalid Input
Invalid Input

Composite applications

Invalid Input
Invalid Input

Additional information

Invalid Input

Additional notes

Invalid Input

File upload

Invalid Input
Invalid Input