blog
Fresh insights and ideas designed to keep you informed and engaged
29.6.2026.
Calculating crack-width limitation – solidian ANTICRACK and the stress-crack opening relationship
Crack-width limitation with solidian ANTICRACK: from mortar bond to measurable performance
The fact that carbon…
29.6.2026.
Repair layer starting at 30 mm: carbon reinforcement without minimum cover – solidian ANTICRACK
Thin repair layers starting at 30 mm: how solidian ANTICRACK changes the layer structure
Reprofiling layers on…
29.6.2026.
How carbon reinforcement works in repair mortar layers – solidian ANTICRACK
Repaired surfaces often crack again. This is not always caused by the mortar itself. In many cases, the new layer simply has…
9.6.2026.
Why life cycle costs can play a decisive role in the selection of reinforcement
Looking beyond initial costs
The initial investment required for a concrete repair using carbon reinforcement may be…
9.6.2026.
Why the choice of reinforcement can determine the long-term performance of a concrete repair concept
The question that often comes second
When planning a concrete repair project, the initial discussions usually focus…
9.6.2026.
Concrete repair without reintroducing a corrosion mechanism
A damage pattern familiar to every repair engineer
The sequence is often similar: A parking deck slab, bridge deck…
19.12.2025.
Who Really Decides What Goes Into a Masonry Wall?
On drawings, masonry details are defined by planners and engineers. In reality, every detail that ends up in a wall passes…
17.12.2025.
Designing Masonry for Long-Term Performance: What Often Gets Overlooked
In masonry design, meeting codes and standards is a given. Walls must satisfy structural requirements, comply with…
12.12.2025.
The Most Common Questions Buyers Ask About solidian Briksy
Skepticism is healthy in construction. New materials must earn trust, and asking tough questions is part of responsible…
2.12.2025.
The On-Site Advantages of solidian Briksy You Feel Immediately
When engineers and contractors talk about bed joint reinforcement, the discussion often stays at the level of standards, load…
28.11.2025.
The Real Advantages of solidian Briksy Over Steel in Modern Masonry Walls
Bed joint reinforcement has become a standard detail in masonry construction - most designers and contractors already specify…
19.9.2025.
From Weakness to Strength – Leonardo da Vinci and Non-Metallic Reinforcements by solidian & kelteks
"Arco non è altro che una fortezza causata da due debolezze, impero che l’arco negli edifizi è composto di due parti di…
